Publicité
STANDBY/SLEEP MODE/OFF
Standby
The machine is in standby mode when the on switch is on and the machine is in idle state, ready to be
used immediately.
Sleep mode
The machine automatically goes into sleep mode after being in standby mode for 10 minutes. When the
machine is in sleep mode, you must first activate it before you can start the machine. Do this by pressing
the control button on the appliance or the ON/OFF button on the remote control.
Off
You can turn off the machine completely by switching off the on switch on the side of the device while in
standby mode.
USE WITHOUT REMOTE CONTROL
·
Press the control button for automatic cleaning. The vacuum cleaner will plot its own path to vacuum
the entire area, taking walls, obstacles and stairs into account.
·
When the machine is finished vacuuming, it will automatically return to the charging station. If no
charging station is installed, the vacuum cleaner enters standby mode.
·
It is also possible to allow the machine itself to stop cleaning. To do this, press the control button. Turn
the device off with the on switch on the side of the machine.
USE WITH REMOTE CONTROL
Important: when adjusting settings with the remote control, you must aim it at the machine.
Do not use the remote control near the charging station as it may interfere with the signal and affect its
operation.
If you will not be using the remote control for a long period of time, remove the batteries.
1.
ON/OFF: on-off button
2.
Display
3.
Plan cleaning (smart cleaning)
4.
HOME: return to the charging station for re-charging
5.
Arrows
6.
Confirmation button/pause button
7.
Suction level adjustment
8.
Clock settings
9.
Wall-guided cleaning
10. Schedule setting
1.
ON/OFF: on-off button
This button is used to switch the appliance from sleep mode to standby mode and vice versa. This is also
the off button to stop the appliance.
2.
Display
Use the display to view your settings.
www.domo-elektro.be
3
5
7
9
DO7296S
1
2
4
6
8
10
65
Publicité
