Asko T608HX Mode D'emploi page 193

STEP 5:
CHOOSING THE PROGRAM SETTINGS
Using the program settings, the drying programs can be further adjusted to your wishes.
Some program settings may not be available for your selected program.
Selected program settings will remain stored after the end of the drying cycle and may be changed
subsequently (except for delayed start which is not stored after the drying is complete).
1. Drying program (which you selected)
2. Dryness level (Extra dry)
3. Gentle dry (Gentle dry)
Choose the program settings before pressing the Start/Pause button.
When the drying program is in progress, program settings cannot be changed.
Press and hold the button under a program setting to display the information (INFO) about it.
Following are the program settings that may be selected using the buttons 2 to 6:
2. Dryness level (extra dry)
You can choose between the following laundry dryness levels (+, ++, +++).
The fi nal level of laundry dryness and drying time will be changed.
3. Gentle dry (Gentle dry)
Switch the gentle dry option On or Off (ON = drying with adjusted, less intensive tumbling).
4. Load
By pressing the button 4, you can choose between loads of the dryer.
Small load
Partial load
Full load
Selection of actual load aff ects the initially displayed anticipated drying time.
1 2 3 4
4. Load
5. Delay Start
6. Selecting extra functions (Options)
5 6
25