Publicité
@ As shown in Fig.3, keep the removable face plate in the case. Then, you can bring the plate safely.
© Removable face plate case
To install the Removable Face Plate
@ Fit either the edge of right or left holes in the face plate over the main unit's pin, and fit it over on the
other side while pushing it.
Fig. 4
@ After fitting the face plate holes, move the face plate up and down a few times to make sure that it has
been fitted securely.
(3) Close the front panel and press the right side of face plate until "click" is heard.
Caution:
. Before removing the removable face plate, make sure the power is off.
. This removable face plate is not water-proof. Do not expose it to water or excessive moisture.
. Do not remove the removable face plate, while driving your car.
. Do not place the removable face plate on the dashboard or nearby areas where the temperature
rises to high levels.
. Do not touch the contacts on the removabte face plate or on the main unit, since this may result in
poor electrical contacts.
. If dirt or other foreign substances get on the contacts, wipe them with a clean, dry cloth.
. Don't apply any strong downward force onto the face plate being open or it might be damaged.
CQ-DPG655/605EUC
af
Publicité
