Publicité
Radio Basics
a
Rd
To use this unit other than in North or South America, please change
the area mode to the "Tuner 2 area" as follows.
[North or South America]
[Other countries]
Tuner 1 area (Factory setting)
Tuner 2 area
FM1 to FM3 : 87.9 to 107.9 MHz
ep
FM1 to FM3 : 87.5 to 108.00 MHz
(200 kHz steps)
(50 kHz steps)
AM
: 530 to 1,710 kHz
AM
: 531 to 1,602 kHz
(10 kHz steps)
(9 kHz steps)
To change Tuner area mode
(After the wiring and installation are completely done.)
1. Change from Tuner 1 area mode to Tuner 2 area mode
(D Press PWR to switch the power on.
(2) Press PWR again to switch the power off.
(3) Keep pressing BAND down and press PWR.
Then "TUNER 2" area mode is displayed tor 10 seconds.
EE
2. Change from Tuner 2 area mode to Tuner 1 area mode.
Perform the above steps ©, © and © again.
Tuner 1 area mode displays within 10 seconds.
Note * The factory setting mode is "Tuner 1" (for North and South America).
e The factory setting mode will be
returned once the unit power is cut off (such as dead
battery, or unit removes from the car).
e When you switch the tuner area mode, settings (clock, preset memories, volume setting,
etc.) will return to their factory setting.
10
CQ-DPG655/605EUC
Publicité
