Télécharger Imprimer la page

Etherma ET-DUO-PLUS Instructions De Montage Et D'utilisation page 17

Publicité

1 . I N T R O D U C T I O N
Congratulations on your purchase of your ET-DUO-PLUS low con-
sumption heater!
The product you have just purchased has undergone numerous
tests and inspections to guarantee the highest quality.
We hope it will give you entire satisfaction.
Please, read carefully this user's guide before installing your de-
vice.
• The warranty of the heater will not cover any damage caused
by non-observance of any of these instructions.
• This guide must be kept and given to any new owner.
• IMPORTANT SAFETY ADVICE: When using electrical appli-
ances, basic precautions should always be followed to re-
duce the risk of fire, electrical shock, and injury to persons,
including the following:
• IMPORTANT - If this heater is installed in a room contai-
ning a bath or shower, it should be so installed that swit-
ches and other controls cannot be touched by a person
using a bath or shower.
• The installation of this product should be carried out by
an electrician or competent person and be in strict accor-
dance with the current IEE Wiring Regulations and rele-
vant Building Regulations.
• The heater must be installed in accordance with these
instructions.
• The heater must be mounted using the wall bracket sup-
plied.
• The heater should be positioned in accordance with the
clearances stated in these instructions.
• WARNING THE SURFACE OF THIS HEATER CAN BE HOT: Mo-
mentary contact with any part of the heater should not cause
injury. However, aged or infirm persons or young children
should not be left unsupervised in the vicinity of the heater
unless a suitable guard is fitted.
• Not intended for use by children or persons with reduced,
physical, sensory or mental capabilities. Cleaning and main-
tenance must not be carried out by children without super-
vision.
• The heater must be installed by an electrician or competent
person and be in strict accordance with the current IEE Wi-
ring Regulations and relevant Building Regulations.
• The use of these heaters is forbidden in any area where there
is a presence of gases, explosives or inflammable objects.
• Neither the connecting cable nor any other object must come
into contact with the hot unit.
• Before connecting the heater check that the supply voltage
is the same as that stated on the heater.
• WARNING: To avoid overheating NEVER cover or obstruct in
any way the heat outlet slots at the top of the heater or the
air inlet slots at the base of the heater.
• DO NOT cover the heater - Do not place material or garments
on the heater or obstruct the air circulation around the he-
ater.
• This heater should be switched off at the isolating switch be-
fore any repair work is carried out. This action should also be
taken during the times of the year when heat is not required.
• The radiator should not be installed just below an electrical
socket or in front of a socket outlet.
17

Publicité

loading