Publicité
Mechanical installation
Installing the refractometer
Plan the installation location carefully before installation. See
(page
10).
• Welding equipment
• Refractometer
• Ferrule
• O-ring
• Clamp
• 17‑mm wrench (for clamp bolts)
These are general instructions for the refractometer mounting. Plan the process‑specific
installation according to your requirements. Contact Vaisala technical support for further
assistance if needed.
1. Familiarize yourself with the safety instructions of the installation site.
2. Make sure the process line is depressurized and empty.
Choosing the installation location
13
Publicité
