Publicité
BRIDGE Function
The cooktop allows two cooking zones to be combined, enabling the use of
large/long cookware or cooking multiple dishes simultaneously, with maximum
flexibility in cookware placement.
To enable or disable the bridge function, the user must press both selection
buttons
will light up, indicating that the bridge has been established.
In some cases, the user will not be able to activate the "bridge key combination,"
resulting in three short beeps. These cases include:
-
If the power level of the cooking zones is above "0".
-
If the key lock is activated.
To set the power level of the bridged cooking zone, press the "slider" control
The power level of the bridge cooking zone is shown on the cooking zone displays.
The power level of the bridged cooking zone is displayed on the cooking zone displays.
When the cooking zones operate as a bridged cooking zone, the selectable power levels range
from 1 to 9, and the Power Boost cannot be selected. (When the cooking zones are operated
individually, the power levels range from 1 to "P").
To deactivate the bridge function, simply press the selection button for either of the two zones.
When the cooking zones operate as a bridged cooking zone and are to be turned off to power
level "0," press both selection buttons for the cooking zone, and the bridged cooking zone will
go to power level "0," and the bridge function will be deactivated.
When the cooking zones operate in bridge mode, and one of the cooking zones does not have
suitable cookware or does not have any cookware, the zone with cookware will display the
power, and the zone without cookware will indicate that it does not detect cookware . After 1
minute, the cooking zone without suitable cookware or without any cookware will turn off, and
the bridge function will be deactivated.
Heat retention
This function allows you to maintain the temperature (70ºC) of the food in a delicate way,
without reaching boiling temperatures or burning the bottom of the utensils.
The heat retention function is activated by pressing the
zone has been selected and the symbol
The heat retention function can be activated on all cooking zones independently of each other.
Once the cooking zone has been selected, the heat retention function will end if:
-
Another function/power level is selected.
-
The heat retention function is pressed again, the heat is turned off
-
If 2 hours elapse from the defined start to retain the heat.
When heat retention function is deactivated, the cooktop will operate at power level "1".
for the zones to be bridged. A sound and an LED point in each zone
is shown in the cooking zone display.
14
key only when the desired cooking
.
Publicité
