Publicité
29. Assembly as leaf blower
Caution: Always switch off the engine when carrying out assembly and/or maintenance work! Wear
protective gloves during assembly to protect yourself from cuts.
Mount the two blowpipes into each other and position them on the main device. Make sure that
they are screwed on all the way and fix them with screw A. Using the blowing attachments:
30. Assembly as leaf vacuum
•
Insert the conical suction pipe 15A through the large opening of the leaf bag 16B and push
the tapered side of the pipe through the narrow opening 16A (see illustration on page 14)
•
Connect the bent suction pipe 15B to the conical nipple 15A as shown in the figure. Bring
the two parts together and turn the bent intake pipe until the hole for the screw matches.
Screw the two parts together.
Manual_FX-LBS126P_Int24_Rev13
15A
15B
40
Publicité
