Télécharger Imprimer la page

FUXTEC FX-LBS126P Mode D'emploi page 34

Masquer les pouces Voir aussi pour FX-LBS126P:

Publicité

Important information on the correct handling of the device. Non-observance of these manual can
lead to malfunction of the device.
User manual. These hints will help you to make optimum use of all functions of the device.
Installation, operation and maintenance of the device. Here you will find detailed manual on
how to proceed
25. Intended/non-intended use
The petrol leaf blower is designed exclusively for blowing leaves. Proper use also includes reading
and adhering to the operating manual before each use. The device must be checked for mechanical
damage before and during use. If repairs are necessary, contact your specialist dealer.
Only spare parts approved by the manufacturer or original spare parts may be used. The device may
only be put into operation in open garden area.
If non-approved or non-original spare parts are used, the operator and not the manufacturer is
liable for any damage to property or persons.
Any use other than that mentioned above is an unintended use:
Proper use also includes reading and adhering to the operating manual.
If non-approved or non-original spare parts are used, the operator and not the manufacturer is
liable for any damage to property or persons.
Any use other than that mentioned above is an unintended use.
Intended use also includes compliance with the operating, maintenance and repair conditions
specified by the manufacturer and the safety manual contained in the manual.
The applicable relevant accident prevention regulations as well as the other generally accepted
occupational health and safety rules must be observed.
Any use beyond this is considered improper use. The manufacturer is not liable for damages of
any kind resulting from this: the risk is borne solely by the user.
Own modifications to the device preclude any liability of the manufacturer for damages of any
kind resulting from such modifications.
The device may only be set up, used and maintained by persons who are familiar with it and
have been informed about the dangers. Repair work may only be carried out by the
manufacturer or by service centres recommended by the manufacturer.
The device must not be used in a potentially explosive environment or exposed to rain.
26. Residual risks and safe working
Even when used as intended, there may still be residual risks due to the design determined by the
intended use, despite compliance with all relevant safety regulations.
Residual risks can be minimized if the "Intended Use" and the "Safety Manual" as well as the
operating manual as a whole are observed.
Consideration and caution reduce the risk of personal injury and damage.
Injury due to disposal of parts.
Risk of carbon monoxide poisoning when used in closed or poorly ventilated rooms.
Manual_FX-LBS126P_Int24_Rev13
34

Publicité

loading