Publicité
EN
WIRED AUDIO
ANALOG
Plug the provided USB-C to 3.5mm cable into the headphone audio USB-C
input to engage analog (wired) audio. Headphones are required to be
powered ON for ANC and Ambient modes to work.
DIGITAL
Plug the provided USB-C to USB-C cable into the headphone USB-C input
to engage digital usb wired audio up to 24-bit / 96kHz. Headphones will
automatically power on if the device supports digital audio.
The microphone will work for phone calls when plugged in.
Only use the provided audio cables with MW75 Neuro.
Headphones are not required to be powered ON for wired audio to work.
Focus tracking will be disabled while wired audio is in use.
6
Publicité
