Bosch GKF 12V-8 Professional Notice Originale page 8

8 | English
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for milling edges and profiles in
wood, plastic and non-metallic lightweight materials while
resting firmly on the workpiece.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
a)
(1) Battery
a)
(2) Battery release button
(3) Temperature monitoring/overload protection indic-
ator
(4) Battery charge indicator
(5) On/off switch
(6) Marking arrow for spindle lock
(7) Spindle locking lever
(8) Routing depth coarse adjustment button
(9) Cap nut with collet
(10) Thumbwheel for fine adjustment of routing depth
(11) Routing depth adjuster fixing screw
(12) Base plate
(13) Handle
(14) Routing depth adjuster locking wheel
(15) Collet
(16) Tool holder
a)
(17) Router bit
(18) Open-ended spanner (17 mm)
(19) Smooth guide column
a) This accessory is not part of the standard scope of delivery.
Technical data
Edge router
Article number
Rated voltage
A)
No-load speed
Compatible collets
Router cage stroke
B)
Weight
Recommended ambient tem-
perature during charging
Permitted ambient temperature
C)
during operation and during
storage
Recommended rechargeable
batteries
1 609 92A 9JY | (12.08.2024)
Edge router
Recommended battery chargers
A) Measured at 20–25 °C with rechargeable battery GBA 12V
B) Depending on battery in use
C) Limited performance at temperatures < 0 °C
Values can vary depending on the product, scope of application and
environmental conditions. To find out more, visit
www.bosch-professional.com/wac.
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑17.
Typically, the A-weighted sound pressure level of the power
tool is 74 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection !
Vibration total values a
determined according to EN 62841‑2‑17:
a <2.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total work-
ing period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
GKF 12V-8
ator from the effects of vibration, such as servicing the
power tool and accessories, keeping their hands warm, and
3 601 FB0 0..
organising workflows correctly.
V= 12
−1
min 13000
Rechargeable battery
mm 6/8
Bosch sells some cordless power tools without a re-
inches ¼
chargeable battery. You can tell whether a rechargeable bat-
mm 36
tery is included with the power tool by looking at the pack-
kg 1.3–1.5
aging.
°C 0 to +35
Charging the battery
°C −20 to +50 u
Note: Lithium-ion rechargeable batteries are supplied par-
GBA 12V...
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
3.0Ah
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s .
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
GKF 12V-8
GAL 12...
GAX 18...
Bosch Power Tools