Publicité
QUICKSETUP
The first time the machine is used, a quick startup guide appears:
the operator is guided through the steps described at the start of
the PRELIMINARY OPERATIONS section. From the SETUP MENU,
select QUICKSETUP, the following screen is displayed:
R1234yf
QUICK SETUP
Press ENTER to proceed
Press ESC to exit.
QUICK SETUP
Press ENTER to proceed with QUICKSETUP, the user will be
guided throught the following steps:
•
Language selection
•
Measure units selection
•
License plate recording
•
Date and time selection
•
Setup header print
•
Tank unlock
•
Vacuum settings
•
Leak check test
•
Tank filling
Follow the instructions displayed. At the end of the procedure,
press ENTER to print a summary report of the guided procedure.
Press ESC to exit.
NOTE: If the guided procedure is not completed, it will be
displayed again the next time the machine is switched on.
NOTE: To display the QUICKSETUP at any time, select from the
menu of the same name under SETUP.
SET DATE / TIME
The machine keeps date and time settings even if it is not used
for around one year. From the SETUP MENU, select SET DATE /
TIME:
R1234yf
Time
Date
SET DATE / TIME
Use keypad to change date and time. Press ENTER to confirm, or
press ESC to return to SETUP menu without saving the changes.
For example, to insert the date January 21
month then
n
keypad; press ENTER to confirm and exit.
SETUP
SETUP
PM
xx
xx
xx
Hours
Minutes Seconds
xx
xx xxxx
Month
Day
Year
st
2015, select the
SETUP HEADER PRINT
The printout can be personalized by entering 4 lines containing
the worksho
and e-mail).
From the SETUP, select SETUP HEADER PRINT:
R1234yf
Use the keypad to modify the 4 lines, then press ENTER to return
to SETUP menu.
NOTE: the numerical keys include an alphabet that is used similar
to text messaging; for example: pre
VACUUM SETTINGS
Allows to modify the default vacuum time and the default time
of check.
From the SETUP, select VACUUM SETTINGS, default setting is
displayed:
R1234yf
Pressing INFO set default values
Vacuum Time
Time of check
Vacuum rising
Each value can be modified, within the values shown in
parentheses.
NOTE: Press DEFAULT to restore default values:
Vacuum time
25 min
Time of check
2 min
Vacuum rising
1 psi
• 14 •
SETUP
SETUP HEADER PRINT
SETUP
VACUUM SETTINGS
xx
xx
psi
xx
9 psi
VACUUM SETTINGS
Publicité
