Publicité
<5 % U
Voltage dips,
for 0.5 cycle
short interrup-
40 % U
tions and voltage
for 5 cycles
variations on
70 % U
power supply
for 25 cycles
input lines IEC
<5 % U
61000-4-11
for 5 sec.
Power frequen-
cy (50/ 60 Hz)
3 A/m
magnetic field
IEC 61000-4-8
Note: U
is the a.c. mains voltage prior to application of the test level.
T
IEC60601-
Immunity test
1-2 test
level
Conducted RF
3 Vrms
IEC 61000-4-6
150 kHz
to 80 MHz
80% AM
(2Hz)
Radiated RF
3 Vrms 80
IEC 61000-4-3
MHz to
2.5 GHz
80% AM
(2Hz)
(95% dip in U
.)
T
T
(60% dip in U
)
T
T
Not
(30% dip in U
)
applicable
T
T
(95% dip in U
)
T
T
Not
applicable
IEC60601-1-
2 test level
3 Vrms
3 V/m
36
Mains power quality
should be that of a typical
commercial or hospital
environment. If the user
of the upper arm stlye
requires continued oper-
ation during power mains
interruptions, it is recom-
mended that thepM-K05
JUMBO be powered from
an uninterruptible power
supply or a battery.
Not applicable
Electromagnetic environment - guid-
ance
Portable and mobile RF communi-
cations equipment should be used
no closer to any partof the PM-K05
Jumbo, including cables, than there
commended separation distance
calculated from the equation applicable
to the frequency of the transmitter.
Recommend separation distance
3V
d = 1.2×p
80Mhz to 800 MHz
1/2
d = 2.3×p
MHz to 2.5 GHz
1/2
where P is the maximum output power
rating of the transmitter in watts (W)
according to he transmitter manu-
facturer and d is the recommended
separation distance in meters (m).
Field strengths from fixed RF transmit-
ters as determined by an electromag-
netic site survey
, should be less than
a
the compliance level in each frequency
range
. Interference may occur in the
b
vicinity of equipment marked with the
following symbol:
Publicité
