Pairing Your Bluetooth Device For The First Time - PERFECTPRO ROCKHART Mode D'emploi

6.
Press the Tuning control to confirm your selection.
The Local or Distant setting is stored in the radio and
remains in force until changed or until a System Reset.
Presetting stations-DAB and FM
You may store your preferred DAB and FM radio stations
to the preset station memories. There are 12 memory
presets in your radio 6 for DAB and 6 for FM. Presets are
memorized by your radio in the event of a power failure.
The procedure for setting presets and using them to
tune stations is the same for FM and DAB mode, and is
described below.
1.
Press the Standby button to switch on the radio.
2.
Press the Source button to select the DAB or FM
waveband.
3.
Tune to the required station as previously described.
4.
Press and hold the Preset button until the display
shows, such as, 'Preset 1 stored.' The station will
be stored under the chosen preset button. Repeat
this procedure as needed for the remaining presets.
Stations stored in preset memories may be overwritten
by following the above procedure.
Recalling a preset station-DAB and FM
1.
Press the Standby button to switch on the radio.
2.
Press the required waveband by pressing the Source
button.
3.
Press the required Preset button to cause your radio to
tune to the station stored in preset memory.
NOTE
The display will show 'Preset Empty' if no station has
been stored to that preset.
FM stereo / mono
If the FM radio station being listened to has a weak signal
some hiss may be audible. It is possible to reduce this
hiss by forcing the radio to play the station in mono rather
than stereo.
1.
Press the Standby button to switch on your radio.
2.
If needed, press the Source button until the FM band is
selected.
3.
Press and hold the Menu button until the Advanced FM
menu shows on the display.
4.
Rotate the Tuning control until 'Audio setting' shows
on the display. Press the Tuning control to enter the
audio type adjustment mode. The current setting will be
marked with an asterisk.
5.
To reduce the hiss from a weak FM signal, rotate the
Tuning control until 'Forced mono' appears on the
display. Then press the Tuning control to confirm the
selection. To return to stereo mode, rotate the Tuning
control until 'Stereo allowed' is shown on the display.
Then press the Tuning control to confirm the setting.
Listening to music via Bluetooth
streaming
You need to pair your Bluetooth device with your radio
before you can auto-link to play / stream Bluetooth music
through your ROCKHART. Paring creates a 'bond' so two
devices can recognize each other.
Pairing your Bluetooth device for the first
time
1.
Press the Standby button to switch on the radio.
2.
Press the Source button to select the Bluetooth mode.
The Bluetooth status indicator (
flashes blue to show the radio is discoverable.
3.
Activate Bluetooth on your device according to the
device's user manual to link to the speaker. Locate
the Bluetooth device list and select the device named
'Rockhart BT'. With some mobiles (which are equipped
with earlier versions than BT 2.1 Bluetooth device), you
may need to input the pass code '0000'.
4.
Once connected, the Bluetooth indicator will remain in
solid blue. You can simply select and play any music
from your source device. Volume control can be adjusted
from your source device, or directly on your radio.
NOTE
1.
If 2 Bluetooth devices, pairing for the first time, both
search for your radio, it will show its availability on
both devices. However, if one device links with this
unit first, then the other Bluetooth device won't find it
on the list.
2.
If you take your source device out of range, the
connection will be temporarily disconnected to your
radio. Your radio will automatically reconnect if the
source device is brought back in range. Be aware
that during the period of disconnection, no other
Bluetooth device can pair or link with your radio.
3.
If 'Rockhart BT' shows in your Bluetooth device list
but your device cannot connect with it, please delete
the item from your list and pair the device with the
radio again following the steps described previously.
4.
The effective operation range between the system
and the paired device is approximately 10 meters
(30 feet). Any obstacle between the system and the
device can reduce the operational range.
5.
Bluetooth / NFC connectivity performance may vary
dependingon the connected Bluetooth devices.
Please refer to the Bluetoothcapabilities of your device
before connecting to your radio. Allfeatures may not
be supported on some paired Bluetooth devices.
Playing audio files in Bluetooth mode
When you have successfully connected your radio with the
chosen Bluetooth device you can start to play your music
using the controls on your connected Bluetooth device.
1.
Once playing has started adjust the volume to the
required settingusing the Volume control on your radio
or on your enabled Bluetooth device.
2.
Use the controls on your device to play / pause and
navigate tracks. Alternatively, control the playback
using Play / Pause (
track buttons ( ) on the radio.
3.
Press and hold the Fast forward / Rewind button to
move through the current track. Release the button
when the desired point is reached.
) on the panel
), Next track ( ), Previous
GB
NL
D
F
7