Publicité
No action is needed from users to
shift the product between 50 and
60 Hz. The product adapts itself
for both 50 and 60 Hz.
Cleaning and storage
Store the product in a cool, dry
place, protected from moisture
and out of the reach of children.
˜ First use
Remove the packaging. Check if all parts are
complete.
NOTE: The product may give off some odour
during first use. These are production or transport
residue that will quickly subside.
˜ Operation
˜ Drying hair
(Fig. A)
1. Connect the power plug
outlet.
2. Select the desired air flow and heat levels:
/ /
7 ]
[
(Switch position)
10 GB/IE/NI
to a suitable electrical
6 ]
[
Air flow
Product off
Product on: gentle air flow
Product on: strong air flow
/
/
[
8 ]
(Switch position)
3. After use: Select
Disconnect the power plug
outlet.
˜ Ionization mode
(Fig. B)
/
4 ]
[
(Switch position)
NOTE: Remove the concentrator nozzle
before using the ionization mode. This optimises
the ionization performance. Use strong air flow
(
) and high heat level (
[
7 ]
mode to dry hair quickly.
˜ Styling hair
Using the concentrator nozzle
1. Put the concentrator nozzle
.
[
10 ]
2. Rotate the concentrator nozzle
position.
3. Switch on the product. Use the concentrator
nozzle
to direct the air flow onto a specific
11 ]
[
section of the hair.
NOTE: We recommended to use gentle air flow
(
) and low heat level (
[
7 ]
hair.
m
CAUTION! Do not remove the concentrator
nozzle
when it is still hot.
11 ]
[
Heat
No heat
Low heat
High heat
to switch off the product.
7 ]
[
from the electrical
6 ]
[
Ionization
LED
Ionization off
Ionization on
[
11 ]
) in ionization
8 ]
[
on the air outlet
[
11 ]
to change the
11 ]
[
) when styling
8 ]
[
1 ]
[
Off
On
Publicité
