Publicité
Heater connection diagram
Important. Application of adequate thermal control systems on feeder lines is mandatory. Performance of all electric
heaters must be periodically controlled to avoid damage due to ice build-up. Modine is not liable in any way for defects
caused by non detected malfunctions. For models supplied with wiring in a junction box, remove the cover to make the
connection. It is compulsory to use power cables with a minimum cross-section according to the technical standards
in force in the country of installation, depending also on the laying method, the length of the cables and their type. To
minimise the risk of indirect contact, it is advisable to earth the unit, using the earth pole (where present). For further
information please refer to the diagrams supplied with the model.
Model
Rows
Total power
230V / 1 / 50-60Hz
=
yellow-green
L
=
brown
N
=
blue
R0
=
heater
SD
=
junction box (standard on B models)
EP
080
081
101
080B
081B
101B
4
6
W
300
300
201
301
201B
301B
6
6
600
900
www.modine.com
27
Publicité
