Télécharger Imprimer la page

Electrolux KEAF7200L Notice D'utilisation page 9

Masquer les pouces Voir aussi pour KEAF7200L:

Publicité

Programme 1)2)
1)
The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the values.
2)
The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for conducting performance tests (e.g. according to:
EN60436 ), send an email to:
info.test@dishwasher-production.com
In your request, include the product number code (PNC) from the rating plate.
For any other questions regarding your dishwasher, refer to the service book provided with
your appliance.
6. SETTINGS
6.1 Programme selection mode and
user mode
When the appliance is in programme
selection mode, you can set a programme
and enter user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the rinse aid
empty notification.
• Activation or deactivation of the acoustic
signal for the end of a programme.
• Activation or deactivation of the AirDry.
The saved settings remain valid until you
change them again.
How to set the programme selection
mode
The appliance is in programme selection
mode when the programme indicator
flashes.
After activation, the appliance is in
programme selection mode by default. If not,
set the programme selection mode the
following way:
Press and hold the on/off button until the
appliance is in programme selection mode.
Water
(l)
4.3
How to enter user mode
Make sure the appliance is in programme
selection mode.
To enter the user mode, press and hold the
programme button until the indicator
flashes and the indicators
on.
6.2 Water softener
The water softener removes minerals from
the water supply, which would have a
negative effect on the washing results and on
the appliance.
The higher the content of these minerals, the
harder your water is. Water hardness is
measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in your
area. Your local water authority can advise
you on the hardness of the water in your
area.
Regardless of the type of detergent used, set
the right water softener level to ensure good
washing results and to keep the salt indicator
active.
Energy
(kWh)
0.013
Duration
(min)
15
,
and
are
ENGLISH
9

Publicité

loading