Publicité
6.3 The rinse aid empty notification
The rinse aid helps to dry the dishes without
streaks and stains. It is automatically
released during the final rinse.
When the rinse aid chamber is empty, the
rinse aid indicator turns on. If the drying
results are satisfactory while using multi-
tablets only, you can deactivate the
notification for refilling the rinse aid. However,
for best drying performance, always use rinse
aid.
If standard detergent or multi-tablets without
rinse aid are used, activate the notification to
keep the rinse aid refill indicator active.
How to deactivate the rinse aid empty
notification
Make sure the appliance is in user mode.
1. Press the programme button immediately.
The indicator
starts to flash.
2. Wait until the indicator
flash and the remaining programme
indicators are off.
The indicator
shows the current setting:
•
is on = Rinse aid empty
notification is on.
•
is off = Rinse aid empty
notification is off.
3. Press the programme button to change
the setting.
4. Press the on/off button to confirm the
setting.
6.4 Acoustic signals
Acoustic signals sound when a malfunction of
the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default this acoustic signal is deactivated but
it is possible to activate it.
How to activate the acoustic signal for
the end of the programme
Make sure the appliance is in user mode.
1. Press the programme button twice.
The indicator
2. Wait until the indicator
The indicator
3. Press the programme button to change
4. Press the on/off button to confirm the
6.5 AirDry
AirDry improves the drying results with less
energy consumption. During the drying
phase, the door opens automatically and
remains ajar.
continues to
Do not try to close the appliance door
within 2 minutes after automatic opening.
This can cause damage to the appliance.
AirDry is automatically activated with all
programmes excluding
The duration of the drying phase and the door
opening time vary depending on the selected
programme and options.
If children have access to the appliance,
it is advised to deactivate AirDry as
opening the door may pose a danger.
How to deactivate the AirDry
Make sure the appliance is in user mode.
starts to flash.
flash and the remaining programme
indicators are off.
shows the current setting:
•
is off = The acoustic signal is off.
•
is on = The acoustic signal is on.
the setting.
setting.
CAUTION!
CAUTION!
continues to
(if applicable).
ENGLISH
11
Publicité
