Speaker installation options
∫ Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached should
be capable of supporting over 10 kg (22 lbs) per screw. Consult a
qualified building contractor when attaching the speakers to a
wall. Improper attachment may result in damage to the wall and
speakers.
≥ When mounting the front speakers or surround speakers to a wall,
we recommend using a string (not included) to prevent it from falling.
4 Screws
Preparation for front speakers and surround speakers
1
Remove the speaker cable from the stand.
2
Connect the cable (➜ page 7).
1 Attach the cover plate to the front speaker or surround speaker.
1
Cover plate
2 Drive a screw (not included) into the wall.
‰4.0 mm (
5
Wall or pillar
3 Fit the speaker securely onto the screw(s) with the hole(s).
Front and surround speakers
106 mm
z)
3
(4
/
16
e.g.
In this position, the
speaker will likely
fall if moved to the
left or right.
8
4 Cover plates
Release the cable
from the groove.
2
Screw
Tighten securely.
‰7.5 to 9.5 mm
q)
/
32
q to
(
19
/
64
5.0 to 7.0 mm (
Center speaker
340 mm
z)
(13
3
/
8
Reattaching the speaker cable to the stand
1 Remove the eight screws from the stand, and remove the speaker net.
2 Position the cable.
Approx.15 cm (5
3 Attach the speaker net with the screws.
∫ Fitting speaker stands
(Except front and surround speakers)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥ The stands must be able to support over 10 kg (22 lbs).
≥ The stands must be stable even if the speakers are in a high
position.
e.g. Center speaker
Metal screw holes
For attaching to
speaker stands
5 mm (
q)
3
/
8
Plate thickness plus 7 mm
q to
q)
3
9
/
/
to 10 mm (plus
16
32
200 mm
z)
(7
7
/
8
Move the speaker
so that the screw
is in this position.
Screw
z)
29
/
32
Press the cable
into the groove.
Cable
(not included)
q), pitch 0.8 mm (
q)
3
/
1
/
16
32
3
60 mm (2
q to
q)
9
/
13
/
32
32
q)
/
8
Speaker stand
(not included)