Keep people away from the movement range of the roller shutter system. The
movement range of the roller shutter system must be completely visually accessible
during the operation. Risk of injury.
Children must not be allowed to play with the product.
EU DECLARATION OF CONFORMITY
The belt winder (item no.
ments of European and national regulations. Conformity has been demonstrated.
The full EU Declaration of Conformity document can be found at: http://www.schel-
lenberg.de (under 'Download-Center', in the 'Service' tab).
Do not discard with household waste! The product is recyclable and can
be returned to a recycling centre or other household electrical waste
collection point
Machinery Directive
2006/42/EC
INTENDED USE
Der ROLLODRIVE 35 ist ausschließlich für die Steuerung von Rollladenanlagen
ausgelegt.
The product is exclusively designed for controlling shutter systems.
The roller shutter system and its parts must be in a perfect condition. Defects in the
system or its parts must be repaired before installing the product.
An easily accessible 230 V AC/ 50 Hz mains socket outlet must be available at the
place of installation (see page 206).
The surface where the product is to be installed must be level.
Only use original spare parts to avoid product malfunction or defects.
22745,
22638) meets the applicable require-
DE
EMC Directive
2014/30/EU
14
RoHS Directive
2011/65/EU