Publicité
1. Remove Bumper Fascia - Open the tailgate.
(a) Using a plastic trim tool, gently pry and remove (1) plastic cover next to each taillight.
(b) Using a 7mm socket, remove (1) screw next to taillight that holds the fascia, (1 each side).
(c) Using a T15 torx bit, remove (1) screw near bottom of tailgate opening, (1 each side).
(d) Using a T15 torx bit, remove (3) screws from inside area holding rear wheel well liner (3 each side).
(e) Using a T15 torx bit, remove (1) screw from bottom area near wheel well (1 each side).
(a)
(d)
©2024 Horizon Global Corporation- Printed in México
(b)
(e)
(c)
Sheet 5 of 24
76655NP
8-14-24
Rev. A
Publicité
