Publicité
When fully charged: Disconnect the power
¾
adaptor 10 from the charging socket 9 and
from the socket outlet .
Close the lid 8 .
¾
NOTES:
Charging time: 4 to 5 hours .
¾
When fully charged: The product
¾
automatically switches to a trickle charge
(maintenance function) .
To avoid possible a damage to the battery, do
¾
not leave the product permanently connected
to the socket outlet .
˜ Assembly
˜ Extension handle
Mounting the extension handle 1 :
¾
Push the extension handle 1 on the product
until the release button 2 locks into place
(see fig . B) .
Dismounting the extension handle 1 :
¾
Push and hold the release button 2 . Pull the
extension handle from the product (see fig . B) .
Extending the extension handle 1 :
¾
Turn the handle grip 3 slightly in an
anti-clockwise direction . Adjust the length .
Fasten it by turning it in a clockwise direction
(see fig . C) .
˜ Brush heads
(see fig . D)
Switch off the product .
¾
22
GB/IE
Select a brush head:
¾
Domed brush head
Suitable for:
Use example:
Flat brush head
Suitable for:
Use example:
Conical brush head
Suitable for:
Use example:
Turn the brush head until it fits on the brush
¾
axle 4 and push it .
Remove the brush head: Pull the brush head
¾
from the brush axle 4 .
˜ Operation
m
ATTENTION! Do not use abrasive cleaning
agents . They could irreparably damage the
surface you are cleaning .
Hold the product close to the surface .
¾
Switching on: Press
¾
Guide the brush head 11 / 12 / 13 over the
¾
surface in circular motions, applying gentle
pressure .
Switching off: Press
¾
11
Cleaning uneven
surfaces
Sinks and fittings
12
Cleaning large, even
surfaces
Floors and walls
13
Cleaning spots that are
difficult to access
Corners and joints
6 .
6 .
Publicité
