Set Up The Network; Standard Mode - Yamaha CD-NT670 Mode D'emploi

1
Turn on the MusicCast compatible device.
2
Tap the MusicCast CONTROLLER app icon on your mobile device and tap "Setup."
Tip
If you have already connected a MusicCast compatible device to the network, tap "Settings" and then "Add New Device."
3
Operate the MusicCast CONTROLLER app following the onscreen instructions, then
press and hold the CONNECT button of the MusicCast compatible device (or the
remote control) for three seconds.
Refer to the Owner's Manual of each MusicCast compatible device for the CONNECT
button.
4

Set up the network

Operate the MusicCast CONTROLLER app following the onscreen instructions to set up
the network.
5
Operate the MusicCast CONTROLLER app to playback.
Tip
• If you want to install a MusicCast compatible device to a location that is out of range of the wireless router, connect
another MusicCast support device to the router with a network cable to extend the range (Extend mode).

Standard Mode

Extend Mode
• Depending on where it is placed, the MusicCast compatible device may not be able to play back a high-resolution audio
source. In this case, connect the device directly to the router with a network cable.
3
En