Installing Batteries In The Remote Control; Using The Remote Control - Yamaha CD-S1000 Mode D'emploi

Controls and functions

■ Installing batteries in the remote control

1
3
1
Press the part and slide the battery
compartment cover off.
2
Insert the two supplied batteries
(AA, R6, UM-3) according to the polarity
markings (+ and –) on the inside of the
battery compartment.
3
Slide the cover back until it snaps into place.
12
En
2

■ Using the remote control

The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the front panel of this unit during
operation.
30 30
Within 6 m (20 ft)