Urmet 1083 Notice page 40

INTERCOM FUNCTION
In the 2Voice system, a door unit button may be programmed to call another user in the same column or
another apartment station in the same apartment. All apartment stations of the called user will ring in the fi rst
case. Only the specifi cally programmed apartment station will ring in the second case.
INTERCOM FUNCTION BETWEEN DIFFERENT USERS
Go to the apartment station to be programmed as caller (apartment station A).
There are two different ways to enter programming state (check which method is used on the instruction
booklet supplied with the product):
1a) With handset off-hook.
– Hold the door opener button (1) pressed and pick up the handset (2). The apartment station A will output
a tone to indicate that programming mode is in progress.
– Press the button to be programmed. The apartment station will output a confi rmation tone.
– Go to the user who will be called by pressing the button (user B) and press the door opener button. The
apartment stations will be beep to indicate that they have been programmed.
Alternatively, go to a calling station and press the calling button of user B. The apartment station being
programming (A) will beep to indicate that it has been programmed. The apartment stations of user B will
ring at the same time. Ignore this call.
B
40
All manuals and user guides at all-guides.com
A
1
A
3
2
USER B
DS1083-029E