Publicité
1. PARTS AND COMPONENTS
Fig. 1
1. Glass door
2. Wooden shelves
3. Handle
4. Hinge
5. Control panel
6. Feet
NOTES:
-
The graphics in this manual are schematic representations and may not exactly match the
device.
-
To make the most out of the appliance in terms of energy, place all the shelves in their
original position, that is, as shown in Figure 1.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the official Cecotec Technical
Support Service.
3. ASSEMBLING THE APPLIANCE
-
This appliance is designed to be used in an upright position and should not be built in.
-
Place the appliance on a flat, stable surface. To level the appliance, adjust its feet.
-
Do not install the appliance inside of a cabinet or any other place where you cannot see the
front part of the appliance.
-
Leave a distance of 10 cm on top of the appliance, at the rear, and sides.
-
Do not place the appliance on a damp room or under direct sunlight or any other source
of heat.
-
After plugging the appliance in, allow it to cool down for 2-3 hours before storing any
bottles inside.
BOLERO GRANDSOMMELIER 4850 BLACK COMPRESSOR
ENGLISH
51
Publicité
