Eaton Tripp Lite Serie Mode D'emploi page 12
Masquer les pouces
Voir aussi pour Tripp Lite Serie:
- Mode d'emploi (215 pages) ,
- Manuel du propriétaire (40 pages) ,
- Guide de démarrage rapide (38 pages)
Publicité
External Battery Installation
To install the optional extended battery module for the UPS:
1.
On the rear of the UPS, remove the external battery retention bracket that is covering the battery
connector.
2.
Plug the extended battery module cable into the UPS external battery connector.
3.
Install the external battery cable retention bracket back onto the UPS and secure it with the two Phillips
head screws.
4.
Set the UPS for extended battery mode see
.
6
Eaton Tripp Lite Series Cloud-Connected UPS Systems User Guide 9349D0—Rev A
2.11 Internal / External Battery Setting (SMART1500LCDTXC)
Publicité
