Publicité
STORING THE MACHINE
When not in use, you can save space by storing the
machine in an upright position on a level surface.
MOVING THE MACHINE
This machine can be transported both folded and
unfolded. There are two sets of transport wheels,
one on the front stabiliser and the other underneath
the slideway. When the rower is unfolded, lift the rear
stabiliser until the front wheels touch the ground.
When folded, tilt the machine forward until the
second set of wheels under the slideway touch the
ground.
ADJUSTING THE RESISTANCE
You can adjust the resistance by turning the edge
of the circular monitor.
16
Publicité
