Publicité
STEP 5
Align
the
holes
slideway (2) and the main frame (1)
and secure using an inner bolt (12)
and flat washer (27) on each side.
STEP 7
Remove the footplates (51) from the
main frame (1).
14
between
the
STEP 6
Then attach the 4 x inner hex bolts (14),
spring washers (33) and arc washers
(24) to the bottom of the slideway (2).
STEP 8
Fit the pedal tube (44) into the notch
under the base and secure using the
bolt provided (13).
You may have to remove the rubber
foot (55) to be able to insert the bolt
(13).
Then re-attach the footplates (51)
using the same bolts as what you
previously removed.
Publicité
