Publicité
EN CFX5
Filling the ice trays with water
Remove the ice trays (
Removing the ice cubes
NOTE
Removal may require additional force using two hands in high humidity conditions which may create an
ice bond underneath the ice trays.
1. Open the ice maker housing lid and li under the front of the ice trays.
2. Remove the ice tray covers and twist trays to release the ice cubes.
Removing the ice maker housing
The ice maker housing can be removed for cleaning or when not in use to increase usable space inside the cooling
device.
Li the housing at one end until the lug unclips, then remove.
Reverse procedure for re-fit, pushing down on lugs to snap into position.
Cleaning and drying the ice maker
When not in use clean and dry the ice trays and inside the ice maker housing to prevent mould.
22
Fig.
on page 22 1) from the ice maker housing (
Fig.
on page 22 2).
Publicité
