Publicité
Consignes de sécurité
3.8 Informations pour l'homologation radio FCC et ISED
Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Ca‐
nada applicables aux appareils radio exempts de licence. L'utilisation est soumise aux deux conditions
suivantes :
(1) l'appareil ne doit pas produire de brouillage ;
(2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
Déclaration relative à la classe A au Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
RF Exposure Requirements\Déclaration d'exposition aux radiations
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator and your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum
de 20 cm de distance entre la source de rayonnement et votre corps.
Operating condtions/Conditions d'utilisation
This device has been approved for both closed containers and openair
environments with the following limitations:
• Closed Containers: For installations utilizing a tilt during installation:
This device is limited to installation in a completely enclosed
container made of metal, reinforced fiberglass or concrete to
prevent RF emissions, which can otherwise interfere with aeronautical
navigation
• Open Air Environment: For operation outside of closed vessels,
the following condition must be fulfilled: This device shall be
installed and maintained to ensure a vertically downward orientation
of the transmit antenna's main beam. Furthermore, the use of
any mechanism that does not allow the main beam of the transmitter
to be mounted vertically downward is prohibited.
• The installation of the LPR/TLPR device shall be done by trained
installers, in strict compliance with the manufacturer's instructions.
• This device shall be installed only at fixed locations. The LPR
device shall not operate while being moved or while inside a moving
container
• Hand-held applications are prohibited.
• Marketing to residential consumers is prohibited.
26
Série SITRANS LR500 avec mA/HART
Instructions de service, 03/2024, A5E52140367-AA
Publicité
