Cleaning The Burner; Servicing; Maintenance And Protection Of Stainless Steel And Enamel Surfaces; Use Of Protective Covers - Proficook PC-GG 1129 Mode D'emploi

Cleaning the Burner

1. Turn the adjustable knob to the 12 o'clock position (off).
2. Disconnect the gas cylinder.
3. Remove the barbecue grilles and the flame cover.
4. Clean the burner with a soft brush or compressed air, and wipe down with a cloth.
5. Clean clogged ports with a pipe brush or a rigid wire.
6. Check the burner for damage (cracks or holes). In the case of damage, refer to your service team or your gas technician.

Servicing

Your gas barbecue should be serviced annually by a technician.
Maintenance and Protection of Stainless Steel and Enamel Surfaces
Your gas barbecue requires regular care in order to ensure that it keeps looking good.
Contrary to popular perception, stainless steel is neither rust resistant nor maintenance-free. Even high-quality stainless steel has to be regularly
cleaned. This prevents rust and other forms of corrosion.
Even brushed stainless steel, which is very popular nowadays, is susceptible to corrosion without the right care. The medium-hard stainless steel that
has been built into your barbecue requires cleaning and protection. This will ensure that you enjoy your barbecue for many years to come.
After assembling the barbecue, we recommend protecting it using olive oil. Spread it in a thin layer on the accessible stainless steel surfaces with a
clean cloth. Following this, polish it and remove oil residue with a clean cloth.
The tried and tested method of protection is not just suitable for use with food, it also helps the cleaning process and the removal of fingerprints.
If repeated regularly, this procedure will save you the unpleasant job of removing stubborn dirt.
Use of Protective Covers
If the barbecue is not used for a long time, it is a good idea to use protective covers. These are also recommended as soon as the barbecue has been
cleaned and dried out well.
When selecting the protective cover, make sure it allows air to pass through.
Residual moisture and condensation can generate damaging, moist air under the cover. If left for a long period, this moist air leads to corrosion, even in
the case of good quality steels.
Enamelled Surfaces
Enamel is an excellent surface coating but it breaks easily. As such, handle enamelled parts carefully.
• Remove dust or dirt by hand in a rinsing bath.
• Be careful not to scratch enamelled surfaces.
• Never use oven cleaner for your gas barbecue. Oven cleaners attack the painted surfaces of your barbecue. This damages the paintwork.
• If the barbecue is clean and dry, you can protect it with a blanket.
• Store the barbecue in a frost-free, dry room.
• Shut the valve of the gas cylinder and store it out of the reach of children.
• Concerning storage, also refer to the information in the section entitled "Safety Notes".

Gas Cylinder

– Always handle the gas cylinder with care!
• If the appliance is not in use, shut the gas cylinder and remove the low pressure regulator.
• Close the cylinder and replace the protective cap.
• Gas cylinders should stand upright outdoors and should be stored out of the reach of children.
• Do not store the cylinder in a basement, as leaking gas can collect on the floor.
• Never store the gas cylinder in places where temperatures can exceed 50 °C.
• Do not place the gas cylinder in the vicinity of a naked flame or other sources of ignition.

Packaging

The product packaging mostly consists of reusable materials.
Help protect the environment! Dispose of materials in the relevant recycling containers provided.

Gas Barbecue

At the end of its service life, do not dispose of the gas barbecue with the household waste!
Ask your local authority or a local recycling company about the proper way to dispose of your product.
PC-GG1129_IM

Storing the Gas Barbecue

Disposal

43
18.01.17