Publicité
The foot warmer can also be used with a
UsB cable and a 5V/2A adapter ( not supplied ).
Safety
This product is equipped with a safety system.
The electronic sensor prevents overheating
of the product over its entire surface by au-
tomatic shut-down in the event of a fault or
when the connector is not properly connect-
ed to the power
cable.
Cleaning and
maintenance
When you are not using the foot warmer and
before cleaning it, follow these instructions :
01 Check that the appliance is turned off.
02 Disconnect the external battery
and the UsB cable.
03 leave the foot warmer to
cool before cleaning.
Troubleshooting
Problem
The device does
not heat up
The device
suddenly stops
Technical data
•
Product reference : lA180403
•
Voltage : DC5V 2.0A
The inner cover of the foot warmer can be
removed and machine washed at 30°C with
a programme for delicate textiles.
The outer cushion can be cleaned by hand
using a damp cloth or sponge and water,
and possibly a little liquid detergent for
delicate fabrics.
should not be machine washed or dry cle-
aned. It should not be twisted, dried in a
machine, calendered or ironed.
When drying the product, do not hang it up
with clothes pegs or similar. Do not expose it
to heat sources such as the sun, a radiator, etc.
on the foot warmer to dry it.
Storage
if you are not using the product for a long
time, it is advisable to store it in its original
packaging in a dry place and not to place any
objects on top.
Reason
External battery
discharged
The overheating protec-
tion function is activated.
Automatic shut-down
is engaged
•
•
Please note that the external cushion
Do not under any circumstances switch
Solution
Charge the external battery before using
the device again.
Connect the device to a 5V/2A
UsB adapter using a UsB cable.
The device is turned off for your
safety. Please wait a few minutes
before restarting it again.
Press the On/OFF button to
use the product again.
Power : 10 W
Dimensions : 42 x 42 x 11cm
Publicité
