Publicité
8
Lower spray arm
9
Upper spray arm
10
Top spray arm
Visual signal
• When the washing programme starts, a red visual signal shows on the floor below the
appliance door. This red signal stays on until the washing programme is completed.
• When the washing programme is completed , a green visual signal shows on the floor
below the appliance door.
• When the appliance has a malfunction, a red visual signal flashes on the floor below the
appliance door.
If the appliance is installed in height, with a flush kitchen furniture door, the visual signal
does not show.
CONTROL PANEL
The controls are on the top on the control panel. To operate with the controls, keep the
appliance door ajar.
1
On/off button
2
Display
3
Delay start button
4
Programme button (down)
5
Programme button (up)
6
ÖKO PLUS button
7
Multitab button
8
RESET button
9
Indicators
1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a
washing programme operates.
1
2
Salt indicator. It comes on when it is necessary to fill the salt container.
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispens-
1)
er.
End indicator. It comes on when the washing programme is completed.
3
4
5
6
7
Indicators
Control panel
8
9
1)
73
Publicité
