Publicité
10
Polarity: Active high (1)
7
Walk test (3)
8
Day/night (4)
Walk test On =
Walk test Off =
Night (armed) =
Day (disarmed) =
11
3
Alarm zone (2)
6
13
1
2
14
15
Single zone EOL
Zone state
Value
0 Ω
Tamper (short)
Normal
Rt
Alarm
Rt+Ra
∞
Tamper (open)
P/N 466-5632-ML • REV C • ISS 15JUL22
+12 V
47K
12K
SW1-3
On
47K
Pin 7 to +12 V
Pin 7 to GND or floating
Pin 8 to +12 V
Pin 8 to GND or floating
Ra
4
JA
Alarm (1)
JT
Rt
Tamper (3)
5
3
4
5
6
7
8
Default
0 Ω
4.7 kΩ
9.4 kΩ
∞
Polarity: Active low (2)
7
Walk test (3)
8
Day/night (4)
Walk test On =
Walk test Off =
Night (armed) =
Day (disarmed) =
12
JT
SW1 - Generic settings
LED ON
Remote ON
Positive Polarity
Range
2
1
4 m
EN: Installation Sheet
Description
DD1012-N and DD1012PI-N are dual motion sensors. They
combine the patented PIR mirror optics technology with the
patented Range Controlled Radar technology.
The DD1012PI-N is designed to be immune up to certain size
and build of pets. Pets up to 18 kg (about 35 cm height)
normally do not cause any problems in standard application
unless they are able to move higher than 35 cm from the floor
in the detection field of view.
Installation guidelines
See Figure 1.
The detector is intended to be mounted on walls but can also
be mounted on ceilings by using a mounting bracket.
Use the following guidelines to determine the best location to
install the detector.
•
Mount the detector so the expected movement of an
intruder is across the detection pattern (see Figure 3).
•
Mount the detector at a stable surface. For the allowed
mounting height, see "Specifications" on page 6.
•
Do not mount the detector within 0.5 m of metallic objects
or within 1.5 m of fluorescent lights.
+12 V
47K
12K
SW1-3
Off
47K
Pin 7 to GND
Pin 7 to +12 V or floating
Pin 8 to GND
Pin 8 to +12 V or floating
JA
LED OFF
6
Remote OFF
5
Not used
4
Negative Polarity
3
2
2
1
1
12 m
6 m
2
2
1
1
9 m
3 / 42
Publicité
