Publicité
Wireless replication function
Set both the transmitting radio and the receiving radio to channel 2.
Turn off the radio.
Hold down the PTT and Monitor keys simultaneously while turning on the radio.
A beep will be heard. Press the PTT key on the transmitting radio, the red LED
stays lit, and the green LED lights up on the receiving radio. All configuration
parameters for all 16 channels from the transmitting radio to the receiving radio
are transmitted. When the copying of the parameters is finished, two beeps are
heard on the receiving radio. The LEDs turn off on both radios.
Turn off and on the radio to complete.
Changing the carrier frequency on which the signal is transmitted at
regular time intervals (frequency hopping)
The regular change of frequency makes it difficult to intercept or intentionally
User manual - 16
Publicité
