Publicité
Press the Monitor key to exit the scan mode. The radio remains on the last channel
with a signal. If no signal channel was found during the scan, then the radio returns
to the channel on which the radio was when the Scan function was activated.
Enable/Disable the voice prompt
Set the radio to channel 10.
Turn off the radio.
Hold down the PTT and Monitor keys simultaneously while restarting the radio.
The voice prompt will announce "Off". Instead of the voice prompt, the operations
will be confirmed by a beep.
Repeat the procedure to activate the voice prompt.
VOX function
The VOX function allows transmission without pressing the PTT key. The transmission
User manual - 13
Publicité
