Publicité
5.19 PIN code
You can secure the camera with a six-digit PIN to prevent the device being used in case of camera theft. To
do this, first select the "On" setting in the "PIN code" menu item. Use the up and down arrow buttons to
change the respective setting, and the right and left buttons to move one position forward or backward.
Confirm the settings with "OK" to complete.
Note: This option has nothing to do with the PIN code on the quick guide you used to register your
ZEISS Secacam. This option is used to password-protect your ZEISS Secacam.
CAUTION!
Please use the PIN code option very carefully. If you forget the selected PIN, the camera is
also useless for you. In this case please contact our customer service. If you have booked a
corresponding data plan, you can also deactivate the PIN request via the ZEISS Secacam app.
5.20 SD cycle
By setting this menu item to "On", you prevent new recordings from being made when the memory card is
full. Otherwise the oldest recordings are overwritten by new ones.
5.21 Reset
If you select "Yes" under this menu item and confirm the selection with "OK", all settings are reset to the
delivery status. The date and time are not affected.
5.22 Send test photo
(This menu item can only be selected if mobile is switched on.)
If you want to test whether sending recordings via mobile works as desired, you can take a test photo.
Note: We recommend that you familiarize yourself with the Pause capture, Time lapse and Timer functions
mentioned above when using mobile mode. The functions will help you take and send the optimal number
of photos.
5.23 Firmware version
The firmware version currently installed on the camera can be seen here. The ZEISS Secacam is continuously
being updated. Please visit www.zeiss.com/cop/downloads and check if firmware updates with a higher
version number are now available for your camera.
5.24 Firmware update
Note: This menu item can only be selected if there is a new firmware version on the SD card. The batteries
need to be fully charged in order to install the update.
We are continuously updating our cameras. New firmware versions with optimizations or even new functions
can be downloaded from www.zeiss.com/cop/downloads.
CAUTION!
Please follow the instructions on the website carefully, otherwise your camera may be
damaged!
36
Publicité
