Télécharger Imprimer la page

Zeiss SECACAM 5 Manuel D'utilisation page 28

Masquer les pouces Voir aussi pour SECACAM 5:

Publicité

3. Preparing the camera
3.1 Opening and closing the camera
Open
Open: Loosen the locking clip on the right side of the camera. Grasp the back of the lock with two fingers
and pull it away from the camera until the lock pops open.
CAUTION!
Pull the contact breaker out of the battery compartment. Some force may be required for this.
Only then will the camera's power supply activate so that the camera can be used.
Close: Close the camera and place the locking clip on the two hooks on the side. Then press the locking clip
backwards.
3.2 Inserting the batteries
CAUTION!
The camera must be turned off before inserting new batteries! Please use either disposable or
rechargeable batteries, do not mix different types of batteries. For black night photography,
please replace all batteries with fully charged batteries.
Battery compartment: Open the camera. When inserting the eight fully charged disposable or
rechargeable batteries, be sure to insert the batteries with the matching polarity as indicated in the battery
compartment.
3.3 Inserting the memory card
The ZEISS Secacam stores the photos and videos on commercially available SD or SDHC memory cards
(guaranteed up to 32 GB); not Micro-SD cards.
28
Close

Publicité

loading