Publicité
2. Your ZEISS Secacam 5 Wide-Angle
Lens: The ZEISS Secacam 5 Wide-Angle uses a lens with a 100° angle of view. This is particularly suitable for
property surveillance and close-range shots.
ON/SETUP/OFF switch: The camera is ready to use right away because we have already inserted batteries,
a memory card and a SIM card for you. With the switch set to "ON", the ZEISS Secacam is armed after the red
flashing status indicator goes out. The display turns on when the switch is set to "SETUP".
Note: Remove the contact breaker before use.
Light sensor: Measures the light intensity. It depends on whether the camera takes color pictures (daylight),
black-and-white pictures without flash (twilight) or black-and-white pictures with flash (night).
Infrared sensor: The passive infrared sensor (PIR) recognizes moving heat sources and triggers the camera.
The sensitivity of the sensor can be set in three levels via the menu.
Status indicator: Lights up red: Display switched on. Flashes red (up to 10 seconds):
After it goes out, the camera is ready to record.
Color LCD display: Setting the button to "SETUP" turns on the display. You can now check the capturing
area, view images or make menu settings after pressing the MENU button.
MENU button: When the display is switched on, the MENU button is used to call up the camera menu.
PLAY button: When the display is switched on, the PLAY button activates review mode.
Color LCD
display
ON/SETUP/OFF
switch
Navigation
buttons and
confirmation
(OK button)
MENU button
PLAY button
27
Publicité
