Publicité
3. Set the trigger to the "ON" position.
The device switches on.
The LED lights up.
4. Pull the squeegee blade over the
surface to be cleaned to vacuum up
the waste water.
Note
Only work with the device until the
MAX mark of the waste water tank is
reached. Switch off the device and
empty the waste water tank, see Emp-
tying the waste water tank.
Note
The LED starts to flash when the bat-
tery is low. The device then switches
off after a certain amount time.
Note
Hard-to-reach surfaces can be vacu-
umed both horizontally and above
head height to a limited extent.
Interrupting operation
1. Set the power switch to "OFF".
The device switches off.
2. Place the device on a level surface.
Emptying the waste water tank
Empty the waste water tank as soon as
it is filled up to the MAX marking.
1. Switch off the device.
2. Removing the waste water tank:
a Disengage the waste water tank.
b Remove the waste water tank.
English
9
Publicité
