Publicité
APPLICATION EXAMPLE
In the system shown below the MC1602 is used as the main
console in a sound reinforcement system. Three vocal micro-
phones, six drum microphones, a microphone from the guitar
amplifier and another from the bass amplifier are connected
to 11 of the 16 available LO-Z inputs. The line-level stereo
outputs
from
an on-stage
keyboard
mixer
and
the stereo
outputs from an electronic percussion system are fed to four
..
HI-Z inputs, A total of 15 input channels are thus used, leav-
ing one free — just in case, The AUX
1 mix system feeds
`
on-stage
power
amplifiers
and
monitor
speakers
for the
STAGE MONITOR
SPEAKERS
5
YAMAHA
Kat i MOOR L kenen
ли
W tu
YAMAHA CORPORATION
Mata ан Tanya
HOUSE SPEAKER SYSTEM
Nema pone
DRUMS MICS
STEREO OUT
FROM KEYBOARD MIXER
—
ef
STEREO OUT FROM
|
ELECTRONIC PERCUSSION SYSTEM
performers,
The
AUX
2 system
is used to drive a digital
reverb/effects unit to add ambience and effects where neces-
sary. The AUX
3 system
feeds a tape recorder to make а
rough
mono
recording
of the performance.
The STEREO
OUT
connectors drive the main house power amplifiers and
speaker system.
This is just one possible way of setting up the MC1602 for
a sound reinforcement application. The actual setup you use
will, naturally, be dictated by your own
particular system
requirements,
|
Ml
www І |
= ELECTRIC GUITAR
AMP MIC
ELECTRIC BASS
AMP MIC
Publicité
