Publicité
3. Check whether the product and all parts are
in good condition, if any damage or defect
is detected, do not use the product, but
follow the procedure described in chapter
"Warranty".
4. Before first use, clean all parts of the product
as described in the chapter "Cleaning".
˜ Setting up the product
INFO:
Do not place the product directly next to a
o
wall or a cupboard. Each person should have
unimpaired access to the pans
The griddle
can be used on both sides. If
[
2 ]
o
you use the grooved side of the griddle, your
food will have the typical grill pattern.
1. Place the product on a clean and level heat-
resistant surface.
2. Place the stone griddle
the product between the guide rails
grease drainage
[
3. Place the griddle
2 ]
[
4. Position the pans
[
˜ Before first use
CAUTION! Hot surface!
The surfaces of the product are liable to get
hot during use. Touch only the temperature
control
and the handles
[
4 ]
The pans
become very hot during use.
[
]
Hold the pans only by the handle.
INFO: The first time the product heats up, a
small amount of smoke and odour may be
generated due to production-related residue.
This is normal and is completely harmless.
Ensure sufficient ventilation; for example, by
opening a window.
1. Insert the mains plug
The power indicator lamp
2. Turn the temperature control
MAX position. The heat-up indicator
lamp
lights up green. The product is
[
5 ]
heating up.
3. Switching off: Turn the temperature control
after 20 minutes to the 0 position.
10 GB/IE/NI
.
[
]
on one side of
1 ]
[
. The
[
9 ]
must face upwards.
]
on the other side.
inside the product.
]
at the sides.
[
3 ]
into a mains socket.
[
8 ]
lights up red.
[
6 ]
to the
[
4 ]
4 ]
[
4. Disconnect the mains plug
socket. The power indicator lamp
5. Allow the product to cool down completely.
6. Clean the product (see "Cleaning").
˜ Operation
˜ Off mode
The product enters off mode once it is
o
plugged in and the temperature control
set to the 0 position.
The product exits off mode when you turn the
o
temperature control
heat-up indicator lamp
The product returns to off mode when you turn
o
the temperature control
during the heating process. The heat-up
indicator lamp
5 ]
[
˜ Heating up the product
INFO:
The heat-up indicator lamp
o
goes off several times during the heating
process. This is not a product malfunction!
It merely indicates that the product is
maintaining the set temperature.
Depending on the room temperature,
o
heating up starts at different positions on the
temperature control
Do not insert the pans
o
while the product is heating up.
1. Select the side of the griddle
want to use.
2. Lightly oil the upper surfaces of the stone
griddle
, the griddle
1 ]
[
inside of the pans
[
3. Insert the mains plug
The power indicator lamp
4. Turn the temperature control
MAX position. The heat-up indicator
lamp
lights up green. The product is
5 ]
[
heating up.
from the mains
[
8 ]
goes off.
[
6 ]
[
4 ]
clockwise and the
[
4 ]
lights up green.
5 ]
[
counterclockwise
[
4 ]
goes off.
lights up and
[
5 ]
.
4 ]
[
into the product
[
]
that you
2 ]
[
as well as the
2 ]
[
.
]
into a mains socket.
[
8 ]
lights up red.
6 ]
[
to the
4 ]
[
is
Publicité
