Publicité
˜ Operation
˜ Switching the product on/off
Switching the product on: Set the
o
function button
[
1 ]
mode (see "Choosing a mode").
The ON/OFF indication light
on to confirm that the product is operating
(Fig. A).
Switching the product off: Set the function
o
to 0
. The ON/OFF indication
button
1 ]
[
[
]
light
switches off.
[
]
˜ Choosing a mode
Set the function button
o
corresponding to the desired mode (Fig. B).
Mode
Function
button
Mode 1
[
]
Mode 2
[
]
Mode 3
[
]
* While keeping the water warm
˜ Using the product without
pedicure attachment
Move your feet back and forth on the massage
o
rollers
for a reflex zone massage.
[
]
The recommended operation time is
o
15 minutes.
˜ Using the product with
pedicure attachment
The product includes 3 pedicure attachments:
o
Pedicure
attachment
Massager
[
3 ]
Callus remover
[
6 ]
Brush
7 ]
[
to an operation
switches
[
]
to the icons
1 ]
[
Function
Vibration massage
Bubble bath*
Vibration massage and
bubble bath*
Function
Massage
Removing hardened skin
Massage
1. Place the desired pedicure
attachment
[
3 ]
[
6 ]
attachment adapter
2. Place the remaining 2 pedicure attachments
onto the 2 slots on the pedicure attachments
storage
.
[
5 ]
3. Rub your foot with gentle pressure on the
pedicure attachment placed on the pedicure
attachment adapter
You may vary the application area on your
o
foot by changing the position of your foot on
the pedicure attachment.
˜ After use
1. Switch the product off (see "Switching the
product on/off").
2. Disconnect the supply cord with power
plug
from the power outlet.
[
]
3. Empty the water container
bathtub or shower.
˜ Cleaning and care
m
WARNING! Risk of electric shock!
Before cleaning the product: Always
disconnect the supply cord with power plug
from the wall outlet. Never let the electrical
components of the product get in contact with
water!
m
ATTENTION! Risk of product damage!
Do not splash water on the function button
the ON/OFF indication light
of the product.
NOTE: Clean the product after each use to
avoid the accumulation of water, grease and
other residues.
1. Removing the massage rollers
massage rollers upwards carefully.
2. Removing the splash guard
locking clips
(Fig. C). Pull the splash guard
[
]
upwards carefully.
onto the pedicure
7 ]
[
.
4 ]
[
.
4 ]
[
into a large sink,
[
8 ]
or the base
[
]
: Pull the
[
]
: Undo the
2 ]
[
GB/IE
[
]
,
1 ]
[
19
Publicité
