Publicité
ENGLISH
EN
CLEANING AND MAINTENANCE
To keep your Venga! robot reliable and operating at peak performance, please perform
the following care procedures. If you notice the robot picking up less dust or debris from
your floor, then please empty the dust bin and clean the filter and the rolling brush.
Cleaning the brushes is important as hair may remain stuck and block them.
Recommended cleaning/replacement frequency:
Dust bin
Filters
Rolling brush
Side brushes
Brush guard
Charging pins
Swivel wheel
A spare parts kit is available on Amazon under the name: SP VG RVC 3001 KIT
(ASIN reference: B09MHTGC78). It is suitable for VG RVC 3001 WH / VG RVC 3000 BK.
Emptying the robot's dust bin
1. Press the bin release button to remove
the dust bin.
Cleaning the robot's filter
1. Remove filter by pulling the white tab.
18 - VG RVC 3001
Cleaning
After each use
Once every week
Once every week
Once every month
Once every month
Once every month
Once every month
Replacing
-
Every 2 months
Every 6-12 months
Every 3-6 months (or when visibly worn)
When the silicone rubber strip on the
brush guard becomes visibly worn
-
-
2. Open dust bin to empty it.
2. To open the filters case, a thin coin is need-
ed.
Publicité
