Publicité
ENGLISH
EN
Install side brushes
Attach side brushes to the bottom
of the robot by pressing a brush
into each slot.
Install the magnetic wall
The magnetic wall allows you to keep your robot vacuum cleaner away from any area or
item you do not want to clean. The robot vacuum cleaner will recognize the wall and will not
cross it.
• If necessary, use scissors to cut the magnetic
strip to a shorter length. Make sure you measure
the length correctly before cutting. Be careful
not to cut the magnetic strip in half in the mid-
dle.
• Use the tape strips provided to stick the magnetic strip to the floor.
Make sure that the magnetic strip lies flat on the floor. It can also be
placed under a thin carpet.
10 - VG RVC 3001
Remove the bumper protectors and
turn on the main power switch on the
bottom of the robot.
Publicité
