Publicité
Troubleshooting
7.4
Setting the temperature
To avoid food waste, note the following:
• Keep temperature fluctuation as low as possible. Only open the minibar as often
and for as long as necessary. Store the foodstuff in such a way that the air can still
circulate well.
• The minibar is equipped with an automatic temperature regulation function.
Select the average of the possible temperature values.
• Adjust the temperature to the quantity and type of the foodstuff.
The minibar is set by default to a cooling temperature of 7 °C (44.6 °F) at an ambient
temperature of 25 °C (77 °F).
The cooling temperature can be set to one of the three following values using the set-
ting button: 5 °C, 12 °C and 7 °C (41 °F, 53.6 °F and 44.6 °F).
The cooling temperature is set in the following sequence: 5 °C ... 12 °C ... 7 °C ...
5 °C (41 °F ... 53.6 °F ... 44.6 °F ... 41 °F) etc.
1. Press and hold the setting button (fig. 3 4, page 4) for at least 5 s, until the
internal lamp (fig. 3 1, page 4) starts to blink.
2. Press the setting button again until the desired cooling temperature value is
selected.
✔ The internal lamp flashes. The number of flashes indicates the temperature set.
The flashing signal is repeated at three intervals:
– The lamp flashes five times: 5 °C (41 °F)
– The lamp flashes once: 12 °C (53.6 °F)
– The lamp flashes three times: 7 °C (44.6 °F)
8
Troubleshooting
Fault
The minibar does not
work.
Power status LED is not
lit.
22
Possible cause
No voltage present in
the AC voltage socket.
No voltage present in
the UPOE socket.
The mains adapter is
defective.
Suggested remedy
➤ Try using another plug socket.
➤ Contact an authorized service
agent.
DM50NTE
EN
Publicité
