Publicité
DM50NTE
Assembling the lock (fig. e, page 10)
1. Put the new lock cover (A 1) into place.
2. Put the decor (B 1) into the decor frame.
3. Screw (B 2) the decor frame (B 3) onto the door.
4. Install the door lock (C 1).
5. Install the lock catch (D 1) in the cabinet.
Assembling the drawer (fig. f, page 10)
1. Push the gasket (1) on the decor frame (2).
2. Screw the door handle (4) onto the door.
3. Push the plugs (3) on the screws of the door handle (4).
4. Push the drawer into the cabinet.
7
Operation
7.1
Before first use
Before first use, clean the minibar inside and outside with a damp cloth for hygienic
reasons (see also chapter "Cleaning and maintenance" on page 23).
7.2
Saving energy
• Only open the minibar as often and for as long as necessary.
• Avoid unnecessarily low temperature settings.
• For optimal energy consumption, position the shelves and drawers according to
their position on delivery.
• On a regularly basis, make sure the door seal still fits properly.
• Clean dust and dirt from the condenser at regular intervals.
7.3
Using the minibar
The minibar starts cooling when connected to a power supply. During normal
operation the power status LED is lit. If an error occurs the error LED flashes (see chap-
ter "Troubleshooting" on page 22).
EN
Operation
21
Publicité
