Publicité
EN
Instructions for DN630:
Warning: DO NOT place hands in either food chute.
DO NOT feed food in to the appliance by hand. ALWAYS use the pusher or handle supplied.
Assembly (for DN630)
Pusher handle
Hand wheel
Pusher
Feeding chute (small)
1. Place the middle cover onto the motor shaft of unit DM070, and turn it as arrow direction to lock in
place (fig. 1).
2. Mount the drain disc and cutting disc onto the shaft, ensuring the flat side of the cutting disc is facing
upward. Mount the locking nut and turn clockwise to lock the cutting disc, otherwise the disc will
come loose and damage the appliance. (fig. 2)
1
6
DM070 (+DN630)_ML_A5_v2_20241113.indb 6
DM070 (+DN630)_ML_A5_v2_20241113.indb 6
Locking nut (code AS994)
2mm slicing disc
4mm slicing disc
Feeding chute (Big)
Upper cover
Locking pad
Middle cover
2
3mm Shredding disc
7mm Shredding disc
Drain disc
2c
2b
2a
2024/11/13 10:12
2024/11/13 10:12
Publicité
