Publicité
EN
Introduction
Please take a few moments to carefully read
through this manual. Correct maintenance and
operation of this machine will provide the best
possible performance from your BUFFALO product.
This machine is designed for vegetable preparation
in restaurants, canteens and similar catering
establishments.
BUFFALO will not accept liability for product failures
in the event that:
•
The instructions in this manual have not been
followed correctly.
•
Unqualified or unauthorized personnel have
adjusted the appliance.
•
The appliance has not been handled and
cleaned correctly.
•
The appliance has been used for a purpose for
which it was not intended.
Assembly
Motor base
4
DM070 (+DN630)_ML_A5_v2_20241113.indb 4
DM070 (+DN630)_ML_A5_v2_20241113.indb 4
Installation
Remove the appliance from the packaging. While
positioning on a worktop, ensure the feet are level
to reduce vibration during operation.
Pack Contents
The following is included:
•
Motor base with shaft pre-mounted
•
Processing bowl
•
Lid
•
Lid plug
•
S blade
•
Instruction manual
•
Veg Prep Attachment for DM070 (sold
separately at purchase code DN630)
BUFFALO prides itself on quality and service,
ensuring that at the time of unpacking the contents
are supplied fully functional and free of damage.
Should you find any damage as a result of transit,
please contact your BUFFALO dealer immediately.
S blade
Lid plug
Lid
Processing bowl
Stop button
Pulse button
Start button
2024/11/13 10:12
2024/11/13 10:12
Publicité
